Matsui International, Inc. Home About Us Contact Us

Flock Print / Transfer System

  1. PRODUCT DESCRIPTION:
    Flock Print / Transfer System is a heat transfer method performed by applying the Flock paper onto a hot melt adhesive agent, called SP Top Ink.
  2. NATURE:
    • Flock Paper – All over flock sheet
      • Size: 400mm x 500mm
      • Number of Colors: 36 Colors
      No. 1
      		 
      No. 2
      		 
      No. 3
      No. 4
      		 
      No. 5
      		 
      No. 6
      No. 7
      		 
      No. 8
      		 
      No. 9
      No. 10
      		 
      No. 11
      		 
      No. 12
      No. 13
      		 
      No. 14
      		 
      No. 15
      No. 16
      		 
      No. 17
      		 
      No. 18
      No. 20
      		 
      No. 21
      		 
      No. 22
      No. 23
      		 
      No. 24
      		 
      No. 25
      No. 26
      		 
      No. 27
      		 
      No. 28
      No. 30
      		 
      No. 31
      		 
      No. 32
      No. 33
      		 
      No. 34
      		 
      No. 35
      No. 36
      		 
      No. 37
      		 
      No. 38
    • SP Top Ink
      • Appearance: Milky White Paste
      • Composition: Water Based Nylon Terpolymer and Caprolactam.
  3. APPLICATION & USAGE:
    Method:
    1. Print SP Top Ink on to the textile using a screen plate of 30 – 60. Mesh/inch (12 – 24 mesh/cm) and stroking 2 – 3 times with a squeegee of 50 - 60° hardness. Before use, SP Top Ink should be stirred thoroughly with a mixer.
    2. Dry/cure the printed textile below 300°F x 1.5 minutes.
    3. Next, put the Flock paper over the cured SP Top Ink and perform a heat press at 320°F x 10 - 15 seconds at 20 psi and peel off the paper after cooling to view the required print.

 

Data Sheets